| Unit | Conversion to | Multiply by | Reciprocal |
| pound per gallon (U.S.) | gram per litre | 119.8 | 0.00835 |
| pound mole (gas) | cubic foot (STP) | 359 | 0.00279 |
| gram mole (gas) | litre (STP) | 22.4 | 0.0446 |
| board foot | cubic metre | 0.00236 | 423.7 |
| milliampere per foot | milliampere per metre | 10.76 | 0.0929 |
| gallons (U.S.) per minute | metre3 per day | 5.451 | 0.1835 |
| pound-force | newton | 4.448 | 0.48 |
| kilopond (Kp) | newton (N) | 9.81 | 0.10 |
Popular Posts
-
For the fluid flow problems, the forces acting on the fluid mass may be any one, or a combination of the several of the following forces: I...
-
In precision machine, in which a definite velocity is of importance, the only positive drive is by means of gears or toothed wheels. It i... -
Observance of the rules for the control of watertight and gastight openings is the responsibility of ALL PERSONNEL and they must be contin... -
Capstan gear is normally fitted forward and aft in ships. The forward gear may comprise a separate cable/warping head which can be used for... -
Copper-Nickel-Iron Alloy Piping (90/10) is used for the piping of the saltwater main and its branches, sanitary system, hangar and magazin... -
Generally speaking the body, bottle, bridge and cover of all valves are made of gunmetal whereas the valve, disc, spindle, thrust collar, s... -
Two types of fan are in general use in ships are, centrifugal fans and axial flow fans. Centrifugal fans consist essentially of a 'w... -
TYPES OF DAVITS · HINGED SCREW TYPE The majority of the older frigates and destroyers retain the hinged screw type of davits for... -
The function of governor is to regulate the mean speed of an engine, when there are variations in the load. Ex. When the load on an eng... -
The method of ventilation and output are decided as discussed above, but to decide the size of fan to handle the total amount of air requir...
1 comment:
My partner and I really enjoyed reading this blog post, I was just itching to know do you trade featured posts? I am always trying to find someone to make trades with and merely thought I would ask.
Post a Comment