| Unit | Conversion to | Multiply by | Reciprocal |
| pound force per inch (psi) | pascal | 6895 | 0.0001450 |
| kip per inch (ksi) | megapascal | 6.895 | 0.145 |
| pound force per inch (psi) | bar | 0.06895 | 14.50 |
| kip per inch | kilogram per millimetre | 0.7031 | 1.423 |
| atmosphere | mm Hg | 760 | 0.001316 |
| atmosphere | pound force per inch | 14.696 | 0.06805 |
| atmosphere | bar | 1.013 | 0.987 |
| atmosphere | megapascal | 0.1013 | 9.87 |
| torr (mm Hg) | pascal | 133.3 | 0.2007501 |
| inch of water | pascal | 248.8 | 0.004019 |
| foot of water | pound force per inch | 0.4335 | 2.307 |
| dyne per centimetre | pascal | 0.1000 | 10.00 |
Popular Posts
-
For the fluid flow problems, the forces acting on the fluid mass may be any one, or a combination of the several of the following forces: I...
-
In precision machine, in which a definite velocity is of importance, the only positive drive is by means of gears or toothed wheels. It i... -
Observance of the rules for the control of watertight and gastight openings is the responsibility of ALL PERSONNEL and they must be contin... -
Generally speaking the body, bottle, bridge and cover of all valves are made of gunmetal whereas the valve, disc, spindle, thrust collar, s... -
Copper-Nickel-Iron Alloy Piping (90/10) is used for the piping of the saltwater main and its branches, sanitary system, hangar and magazin... -
Capstan gear is normally fitted forward and aft in ships. The forward gear may comprise a separate cable/warping head which can be used for... -
TYPES OF DAVITS · HINGED SCREW TYPE The majority of the older frigates and destroyers retain the hinged screw type of davits for... -
The method of ventilation and output are decided as discussed above, but to decide the size of fan to handle the total amount of air requir... -
Two types of fan are in general use in ships are, centrifugal fans and axial flow fans. Centrifugal fans consist essentially of a 'w... -
The function of governor is to regulate the mean speed of an engine, when there are variations in the load. Ex. When the load on an eng...
No comments:
Post a Comment